DIY: Blanket Scarf

Last year blanket scarves were the accessory to have all fall and winter. I posted this DIY last winter after I made some for Christmas gifts and decided I would post it again in an effort to keep you looking fab this fall on the cheap.

Material List: 
2 yards of your chosen fabric. I used cotton flannel from Joann Fabrics (7.99 /per yard)
Measuring Tape
Scissors
Needle.  

Step 1: Cut down the width of the fabric to 25” wide (x72” long).  Use the fabric’s plaid grid as a guide when cutting your fabric to help you create straight, clean cuts. 

Step 2: To create on the ends of the scarf, simply remove the fabric’s weft yarns (the yarns that run left to right) along the short side of the fabric. I used a needle to release the yarns. Continue removing yarns until you reach your desired fringe length. I decided on 1 ½” fringe. 

Step 3:
Repeat step 2 on the opposite end of the fabric. You should now have fringe on both of the short sides of the scarf.

 {I cut on the white line}
 {How I pulled up the yarns}

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: